Thursday, May 20th
Opening Session
Keynote address
S. Donati (University of Pavia)
Presentation of LEOS-Italian Chapter Prize to M. Lenzi
9.45 Jones matrix analysis of high-precision displacement measuring
interferometers
P. de Groot (Zygo Corporation, USA)
10.00 Positioning control of large objects with subnanometric accuracy
F. Bertinetto, G. Mana, P. Cordiale, M. Zangirolami (Istituto
di Metrologia "G. Colonnetti", Italy), M. Bisi, F. Pepe, S. Cesare (Alenia
Aerospazio, Italy), E. Canuto, F. Donati (Politecnico di Torino
and EICAS Automazione, Italy)
10.15 Extended range, micron accuracy, absolute fibre-optic remote distance
measurement system based on low coherence ranging
G. M. Dobre, A. G. Podoleanu, D. A. Jackson (University of Kent,
UK)
11.15 Accurate measurement of ophtalmic power of test lenses for the
calibration of focimeters
V. Greco, G. Molesini (Istituto Nazionale di Ottica, Italy)
11.30 Interferometric distance assessment by recurrence multiwavelength
method
I. P. Gurov, A. A. Kirienko (Institute of Fine Mechanics and
Optics, Russia)
11.45 Interferometry with optical pickups
F. Quercioli, B. Tiribilli, A. Bartoli (Istituto Nazionale di
Ottica, Italy)
12.00 (Invited paper) The VIRGO interferometric gravitational
wave detector
A. Giazotto, S. Braccini (Progetto VIRGO and INFN, Pisa, Italy)
14.30 Characterisation of composits materials by means of electronic
speckle pattern interferometry
P. Picart (École Nationale Supérieure d’Ingénieurs
du Mans, France), E. Lolive, J.-M. Berthelot (Université
du Maine, France)
15.00 A phase modulated method to improve the resolution of a self-mixing
interferometer
F. Gouaux, N. Servagent, T. Bosch (Ecole des Mines de Nantes,
France)
15.15 A novel low-coherence sensor for industrial applications based
on a self-mixing super luminescent diode
L. Rovati, F. Docchio (University of Brescia, Italy)
15.30 Autocorrelation of speckle signal from self-mixing laser diode
for velocity and length measurement
S. K. Ozdemir, S. Ito, S. Shinoara, H. Yoshida (Shizuoka University,
Japan)
16.45 Highly-sensitive measurement of a speckle-pattern displacement
using photorefractive crystals
A. A. Kamshilin, N. N. Nazhestkina, K. Paivasaari, V. V. Prokofiev
(University
of Joensuu, Finland)
17.00 Development of an optical sensor for the measurement of surface
roughness and waviness
F. Docchio, U. Minoni, R. Rodella, L. Rovati, (University of
Brescia, Italy), V. Corallo (Techint Compagnia Tecnica Internazionale,
Italy)
17.15 The use of different analog-to-digital converters in a real-time
digital laser speckle correlation-based displacement- and strain-sensor
with optical preprocessing
C. Kargel, B. Zagar (Technical University of Graz, Austria)
17.30 Correlation between intensity and phase in speckle pattern interferometry
M. Sorel, G. Martini, S. Donati (University of Pavia, Italy)
Session 4: Fiber Sensors
(Chair: Y. Salvadé, University of Neuchâtel, Switzerland)
9.30 Dual purpose remote measurement technique for distance and vibration
based on heterodyne detection
G. M. Dobre, D. J. Webb, S. F. O’Neill, C. N. Pannell, D. A. Jackson
(University
of Kent, UK)
9.45 Characterization of static and dynamic behavior of steel motorway
bridges by means of bragg-grating fiber sensors
L. Galante, G. Tognoni (Autostrada Brescia-Verona-Vicenza-Padova,
Italy), C. Modena, F. Reginato, L. Magro, C. G. Someda (University
of Padova, Italy), F. Bertolini, B. Griffoni (GHT, Italy)
10.00 A Fiber Bragg Grating (FBG) based sensor system for cure monitoring
of smart composites
P. Y. Chan, V. M. Murukeshan, L. S. Ong, L. K. Seah (Nanyang
Technological University, Singapore)
10.15 Comparative measurement of vibrations in a composite material
board using embedded optical fiber interferometry and electronic sensor
reference
J. A. G. Souto, J. I. Santos, H. Lamela (University of Madrid
"Carlos III", Spain)
11.30 Active Surface Imaging System "ASIS"
R. Flatscher (Dornier Satellite Systems GmbH, Germany), A.
Ullrich (Riegl Laser Measurement Systems, Austria), G. Paar (Joanneum
Research, Austria), G.-J. Ulbrich (ESTEC, Germany)
11.45 Development of an optical sensor for transverse positioning with
respect to a reference laser beam
J.-C. Barriere, H. Blumenfeld, M. Bourdinaud, O. Cloue, F. Molinie,
P. Schune (CEA-Saclay, DSM/DAPNIA, France)
12.00 Novel frequency-modulated-radar-based 3D sensor
P. Thürmel, R. Schneider (Siemens AG, Germany)
12.15 Intensity modulated all-fibre transducer for measuring microdisplacement
in two axes
M. A. Morante, A. Cobo, J. L. Arce-Diego, J.
M. Lopez-Higuera (University of Cantabria, Spain)
14.30 Real-time 3-D imaging of integrated circuit structures
A. Dubois, L. Vabre, A. C. Boccara (Ecole Supérieure
de Physique et Chimie Industrielles, France)
14.45 Making industrial measurements based on Moiré topography
J. Paakkari (VTT Electronics, Finland)
15.00 Fast acquisition of points clouds by means of a 3D optical sensor
based on active stereo vision
G. Sansoni, R. Rodella (University of Brescia, Italy)
15.15 Development of a transparent optical telescope for the absolute
positioning with respect to a reference laser beam
J.-C. Barriere, O. Cloue, C. Guyot, P. Ponsot, J.-C. Saudemont,
J.-P. Schuller, P. Schune, S. Sube, (CEA-Saclay, DSM/DAPNIA, France)
15.30 Optoelectronic vison system based on hardware microcontroller
system for autonomous mobile platforms
H. Lamela, C. Pulgar, A. J. Varo, M. A. Ferreras, E. García
(University
of Madrid "Carlos III", Spain)
16.45 Exhibition / Poster Session
17.45 Session ends
19.00 Bus departure for Social Dinner
Session 6: Telemetry
(Chair: R. Myllylä, University of Oulu, Finland)
9.30 Liquid level measurement using laser beam modulated by spread spectrum
signal
F. J. López Hernandez, A. Santamaría, J. R. Vento
Alvarez
(Universidad Politécnica de Madrid, Spain), R. Perez
Jimenez, J. A. Rabadán Borges (University Las Palmas de Gran
Canaria, Spain)
9.45 A new laser rangefinder for three dimensional shape measurement
of specular objects
M. Baba, T. Konishi, K. Noda (Okayama University, Japan)
10.00 High accuracy uniaxial FMCW-LIDAR system
M. Nöding, W. M. Steffens (University of Kassel, Germany),
M.-C.
Amann (Technische Universität München, Germany)
10.15 Laser-optical co-ordinate measurement using phase shift evaluation
of sinusoidally intensity-modulated light with particular regard to disturbance
effects
T. Gogolla, K. Siercks (Ruhr-Universität Bochum, Germany)
11.15 A space perception aid system for the blind
R. Damaschini, R. Farcy (Laboratoire Aimé Cotton, France)
11.30 Absolute distances measurement by the Talbot effect
G. Schirripa Spagnolo, G. Guattari (University of Roma 3, Italy),
D. Ambrosini (University of L’Aquila)
11.45 Pulsed time-of-flight laser radar based on custom designed receiver
and time interval measurement ICs
P. Palojärvi, K. Määttä, J. Kostamovaara (University
of Oulu, Finland)
12.15 A rotary encoder system with digitally increased resolution
F. Chierchi, V. Liberali, G. Torelli (University of Pavia, Italy),
A.
Simoni (ITC-IRST Trento, Italy)
Friday 10:30 to 17.30, Saturday 9.00 to 12.30.
Authors are kindly requested to stay in the vicinity of their poster at least during the coffee breaks
P2 High sensititvity non-contact optical method for dimensional analysis
of samples
I. Colamatteo, P. Maddalena (INFM, University of Napoli "Federico
II", Italy)
P3 The accuracy of time-of-flight measurement data analysis
B. Medved Rogina (Rudjer Boskovic Institute, Croatia)
P4 A liquid crystal optical attenuator for a time-of-flight laser radar
A. Kilpelä, J. Kostamovaara, R. Myllylä (University
of Oulu, Finland), A. Karppinen (Patent Agency Teknopolis Kolster
Oy, Finland)
P5 Surface inspection using a compact disc reading head
B. Tiribilli, A. Bartoli, F. Quercioli (Istituto Nazionale di
Ottica, Italy)
P6 Application of the ring He-Ne laser as a two-frequency source in
heterodyne laser interferometer
V. M. Yasinskii (Institute of Physics of the National Academy
of Sciences of Belarus, Belarus)
P7 Optical control of crankshaft finish
D. Fontani (Centro di Eccellenza Optronica, Italy), F. Francini,
G. Longobardi, P. Sansoni (Istituto Nazionale di Ottica, Italy)
P8 Vibration-analysis by digital correlation of laser speckle
G. Schirripa Spagnolo, (University of Roma 3, Italy)
P9 Finite element analysis of Carbon Fibre Reinforced Plastics (CFRP)
containing embedded optical fibre sensors utilising sub-modelling technique
H. Kok Chian, C. Gin-Boay (Nanyang Technological University,
Singapore)
P10 Simple and efficient technique for the design and analysis of accelerometers
based on optical fiber cantilever beams
A. Cobo, M. A. Morante, J. L. Arce, F. J. Madruga, C. Jaúregui,
J. M. López-Higuera (University of Cantabria, Spain)
P11 Accurate modeling of the coupled power between multimode optical
fibers for displacement measurements
A. Cobo, M. A. Morante, J. L. Arce, C. Jaúregui, D. Pereda,
M. A. Quintela, J. M. López-Higuera (University of Cantabria,
Spain)
P12 A distance-indipendent high sensitivity displacement sensor based
on AM modulation
S. Campopiano, A. Irace, A. Cutolo (University of Napoli "Federico
II", Italy)
P13 A 3D vision system for robotics application using phase shift rangefinder
and silicon micromirrors
C. Ganibal, C. Lemaire, M. Briot (LAAS-CNRS, France), M.
Lescure
(LEN7-ENSEEIHT, France)
P14 Optoelectronic integrated system to detect profile, straightness
and geometry of tracks
E. Casagrande (Tecnogamma s.a.s, Italy), G. Clemente (University
of Padova, Italy), G. Schiavi (Consorzio Padova Ricerche, Italy)
P15 Optical fiber vibration transducer based on a diffraction grating
A. Cobo, J. Echevarría, F. J. Madruga, C. Jaúregui,
M. A. Quintela, J. M. López-Higuera (University of Cantabria,
Spain)